The test card of a Lightform device that is connected to your computer can be turned on and off.
- In Creator, go to the Control page by clicking Control in the top-right corner
- In the Device Settings click Test Card On or Test Card Off (mid-way down the page on the left side)
Note - your computer and device must be on the same network for this to work. i.e. if you device is paired to wi-fi "abc 5g", your computer needs to be using "abc 5g". If your computer is connected to your Lightform device's network "Lightform Dazzling Faierie" then the device needs to be in pairing mode broadcasting it's own wi-fi network "Lightform Dazzling Faeirie."
If you've gone through an initial update of the device's firmware, you can also manually turn the test card on.
- With an LF2/2+ - press the back button on the remote once
- With an LFC - give the power button on the back of the device a light tap to trigger the test card to come up