Skip to main content

How do I pair the LF2/2+ remote? How do I charge the remote?

Pair Remote

If your remote loses connection to your LF2/2+, you either need to charge the remote or pair it to your LF2/2+ device again. 

If you're using a new remote, you will need to pair the new remote to your device. 

 

To do this: 

  1. Make sure your LF2/2+ is on
  2. Place the remote next to or near the LF2/2+
  3. Press and hold the + and - buttons on the remote at the same time
  4. Once it is paired, you will see blinking visual feedback

 

Please Note: The remote control for the LF2/2+ contains a small Class 3R infrared laser that is invisible to the naked eye.  Class 3R lasers are considered low risk for injury, however, you should never deliberately look or stare into the laser emitter.  As an extra precaution, it is recommended to keep the remote out of reach of children.

Charge Remote

To charge your remote, plug a mini-USB cable into the port on the right side of the remote. You can also use the remote without the battery if the remote is plugged in directly. 

Note: The remote needs a strong charge -- if you aren't noticing the device react to using it but the light on the remote is still showing up, it may have a low charge. Please charge the remote for at least 30 minutes before trying again. 

 

Replacement Battery

If you lose the battery for your remote, you can purchase the following compatible universal battery on amazon here. 

 

 

Related articles

Comments

0 comments

Please sign in to leave a comment.